BILKA 150g Foil

bilka 150g 1

BILKA 150g Foil

Diffusion foil under the cover

BILKA Foil 150g is a diffusion foil under a modern roof. Thanks to its breathability, it does not require any ventilation duct between the foil and insulation. Thus, no air currents are generated, increasing the efficiency of the insulation. The middle membrane of the three-layer foil provides breathability and successfully evacuates water from the surface.

Technical characteristics:

  • specific weight 150g/m² ± 11%
  • tensile strength 240N/5cm (-50; +50) / 130N 5cm (-30; +30)
  • temperature range: -30 : 80 ⁰C
  • waterproofing degree W1
  • Sd 0,02m (+0,03;-0,01);
  • material: polypropylene
  • EN 13984:2013
Product NameBILKA 150g Foil
Package sizeRolls 1,5 m x 50 m = 75 m²/roll
Purpose and usageDiffusion foil under the cover - used as additional protective layer against the dust and the moisture that penetrates under the cover, in the single layer ventilation roofs. It is recommended to be used for roof with sheathing.
Material: Three-layer foil (between two layers of polypropylene, one membrane permeable to diffusion of vapors, but waterproof)
CaracteristicsTest method Declared value
Roll length EN 1848-250m (-0/+2%)
WidthEN 1848-2 1,5m ± 0,5%
Mass per unit EN 1849-2150 g/m² ± 11%
Reaction to fire EN 11925-2 E Class
Watertightness (2kPa)EN 1928W1 Class
Watertightness after artificial ageingEN 1296; EN 1928W1 Class
Resistance to tearing (Longitudinal/Transverse)EN 12310-1160N (+40; -40) / 170N (+40; -40)
Tensile strength (Longitudinal/Transverse)EN 12311-2 240 N/50mm (+50; -50) / 130 N/50mm (+30; -30)
Elongation (Longitudinal/Transverse)EN 12311-2100% (+40; -40) / 150% (+50; -50)
Tensile strength after artificial ageing (Longitudinal/Transverse)EN 1296; EN 1297; EN 12311-2170 N/50mm (+40; -40) / 90 N/50mm (+30; -30)
Elongation after artificial ageing (Longitudinal/Transverse)EN 1296; EN 1297; EN 12311-270% (+30; -30) / 110% (+50; -50)
Vapour permeabilityEN 1931 >1700 (g/m²)/24h
SdEN 1931 0,02m (+0,03; -0,01)
Application temperature range--30 : 80 ⁰C
Dangerous substances-NPD

Assemblage rules:

The foil under the roof is installed in compliance with the standard DIN 4108 ensuring ventilation under the foil, fixed with battens and rafters, with upward inscription. Given that Bilka 140 g foil is permeable to the vapors of the composition, it can be mounted directly on the heat insulation, the ventilation channel between the foil and insulation will not occur. The foil is mounted parallel to the eaves, with an overlap marked on the roll edge with a colored stripe (min. 10 cm). It will be mounted given the direction of the water flow, it can cross over the ridge of the roof. It is a diffusion foil that resists to normal thermal loads. The foil should be protected from direct exposure to UV radiation within one month of installation and from the effects of scattered radiation in max. three months, by the installation of insulation on the inside.

Storage and warehousing rules:

At shelter, dry place, away from moisture, sunlight and radiant heat

Period of use:

In compliance with the storage rules, retain their qualities for 5 years from purchase

Warranty:

In compliance with the regulations in force, under the observance of the transportation conditions indicated by the supplier.

Related prescriptions, specifications:

SR EN 13984:2013

Possible risks, prevention prescriptions:

There is no risk of endangering health.

Ask for an offer

Please fill out the form and we will contact you for an offer in the shortest time.